AISI 1045

AISI 1045

AISI 1045

AISI 1045 steel is a medium tensile steel supplied in a black hot-rolled or normalized condition. It has a tensile strength of 570 - 700 MPa and Brinell hardness ranging between 170 and 210. AISI 1045 steel is characterized by good weldability, good machinability, and high strength and impact properties in either the normalized or hot-rolled condition. AISI 1045 steel has a low through-hardening capability with only sections of around 60 mm in size being recommended as suitable for tempering and through-hardening. However, it can be efficiently flame- or induction-hardened in the normalized or hot rolled condition to obtain surface hardnesses in the range of Rc 54 - Rc 60 based on factors such as section size, type of set up, quenching medium used etc. AISI 1045 steel lacks suitable alloying elements and hence does not respond to the nitriding process.

Chemical Composition

Element Content(%)
Carbon, C 0.420 - 0.50 %
Iron, Fe 98.51 - 98.98 %
Manganese, Mn 0.60 - 0.90 %
Phosphorous, P ≤ 0.040 %
Sulfur, S ≤ 0.050 %

Mechanical Properties

Properties Metric Imperial
Hardness, Brinell 163 163
Hardness, Knoop (Converted from Brinell hardness) 184 184
Hardness, Rockwell B (Converted from Brinell hardness) 84 84
Hardness, Vickers (Converted from Brinell hardness) 170 170
Tensile Strength, Ultimate 565 MPa 81900 psi
Tensile Strength, Yield 310 MPa 45000 psi
Elongation at Break (in 50 mm) 16.0 % 16.0 %
Reduction of Area 40.0 % 40.0 %
Modulus of Elasticity (Typical for steel) 200 GPa 29000 ksi
Bulk Modulus (Typical for steel) 140 GPa 20300 ksi
Poissons Ratio (Typical For Steel) 0.290 0.290
Shear Modulus (Typical for steel) 80 GPa 11600 ksi

Sheets / Plates

Production Route Hot Rolled, Cold Rolled
Material Standard AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, IS & Custom Chemistry
Size Width from 100mm to 3000mm ; Length from 500mm to 12000mm
Thickness 0.1mm to 400mm
Delivery Condition As Rolled, Annealed, Quenched and Tempered, Normalized
Surface Finish Plain, Brushed, Cladded

AISI 1045 Applications

1) Structures in Buildings, bridges, railway stations.

2) Fabrication of pipeline components & Industrial equipment.

3) Construction of automotive bodies, warehouses, shipping containers.

4) Commercial appliances, etc.