AISI 1211
Carbon steels are steels containing carbon as the chief alloying element. These steels contain aluminium, chromium, copper, nickel, and molybdenum in small quantities. They also contain 0.4% of silicon and 1.2% of manganese. Impurities such as phosphorous and sulfur are also present in these steels.
| Element | Content(%) |
|---|---|
| Iron , Fe | 98.7 - 99.23 |
| Manganese, Mn | 0.60-0.90 |
| Carbon, C | 0.13 |
| Sulfur, S | 0.10 - 0.15 |
| Phosphorous, P | 0.070 - 0.12 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 515 MPa | 74700 psi |
| Yield strength (depending on temper) | 400 MPa | 58000 psi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80.0 GPa | 11600 ksi |
| Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 10% | 10% |
| Reduction of area | 35% | 35% |
| Hardness, Brinell | 163 | 163 |
| Hardness, Knoop (converted from Brinell hardness) | 184 | 184 |
| Hardness, Rockwell B (converted from Brinell hardness) | 84 | 84 |
| Hardness, Vickers (converted from Brinell hardness) | 170 | 170 |
| Machinability | 95 | 95 |
Sheets / Plates
| Production Route | Hot Rolled, Cold Rolled |
| Material Standard | AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, IS & Custom Chemistry |
| Size | Width from 100mm to 3000mm ; Length from 500mm to 12000mm |
| Thickness | 0.1mm to 400mm |
| Delivery Condition | As Rolled, Annealed, Quenched and Tempered, Normalized |
| Surface Finish | Plain, Brushed, Cladded |